1. The charging cabinet shall be strictly inspected for any damage or looseness of the components in transit before being used with electricity.
2. The charging cabinet is connected with a 220V alternating current, so charged maintenance is strictly prohibited. Non-professional maintenance personnel is strictly prohibited to remove the side panels to avoid electric shock hazard.
3. In case of electric leakage, short circuit, overload, and other failures in use, the electric leakage and short circuit protector on the side of the charging cabinet (namely, the power electric leakage switch) will cut off the power supply. Restart the electric leakage and short circuit protector switch (press the electric leakage protection button before it is started). In case it protects again, please ask professional maintenance personnel to troubleshoot before use.
4. The charging cabinet can only charge the “lithium battery” type mine lamps, and it is strictly prohibited to charge lithium battery mine lamps produced by other manufacturers, and lead-acid mine lamps and nickel-metal hydride battery mine lamps. Otherwise, the consequences shall be borne by the owner.
5. The power supply for the ammeter/voltmeter inside the side panel shall be installed by the professional personnel. In case of reverse or wrong connection, permanent damage will be caused to the ammeter/voltmeter
6. The ground wire for the charging rack and computer must be firmly installed. In case the ground wire is not stably installed, instability of the whole system or permanent damage to the product will be caused.
